How to clean the fuel injector at home when the fuel injector is blocked?
Share
When the fuel injector is clogged, the fuel injection is not smooth, or there is carbon deposit and glue in the gap of the fuel injector, and the designed fuel injection volume or atomization effect cannot be reached, then it needs to be cleaned. The position that is really likely to affect the atomization should be the outer surface of the fuel injection port of the fuel injector. A car that does not burn well will easily cause recoil and pollute this position.
①Put the fuel injector in gasoline or cleaning oil, carefully remove the external oil, and then wipe it with a soft cloth. Check whether the rubber ring on the injector is damaged, and replace it in time if damaged.
② Pour two bottles of special fuel injector test agent into the ultrasonic cleaning tank, about 2000mL.
③ Put the cleaning bracket in the ultrasonic cleaning tank, put the fuel injector on the bracket, and the cleaning agent must soak the surface of the bracket.
④ Turn on the power switch of the ultrasonic injector cleaning machine and press the ultrasonic key.
⑤Set the cleaning time (the equipment defaults to 10 minutes), and the adjustment time is 600s.
⑥The fuel injector is backwashed. Connect the backwash connector of the cleaning machine to the fuel injector, and put it on the test stand, then adjust the oil supply pressure to 20-400kPa, and press the cleaning button.
⑦ After cleaning, turn off the oil pump (press the oil pump button), and remove the injector connector.
①Put the fuel injector in gasoline or cleaning oil, carefully remove the external oil, and then wipe it with a soft cloth. Check whether the rubber ring on the injector is damaged, and replace it in time if damaged.
② Pour two bottles of special fuel injector test agent into the ultrasonic cleaning tank, about 2000mL.
③ Put the cleaning bracket in the ultrasonic cleaning tank, put the fuel injector on the bracket, and the cleaning agent must soak the surface of the bracket.
④ Turn on the power switch of the ultrasonic injector cleaning machine and press the ultrasonic key.
⑤Set the cleaning time (the equipment defaults to 10 minutes), and the adjustment time is 600s.
⑥The fuel injector is backwashed. Connect the backwash connector of the cleaning machine to the fuel injector, and put it on the test stand, then adjust the oil supply pressure to 20-400kPa, and press the cleaning button.
⑦ After cleaning, turn off the oil pump (press the oil pump button), and remove the injector connector.